PH Plus granular - Sodium carbonate - 5 kg

It increases the pH level in the pool or spa water, which should be between 7.2 and 7.6, guaranteeing a sanitizing action that allows the entire structure to be kept in ideal conditions, avoiding discomfort and/or problems during the its use.

FEATURES

• Crystalline solid appearance
• Na2CO3 content 99.20% min.
• Density at 20°C 1.075 approx. g/cm3

INSTRUCTIONS FOR USE

1) Dissolve the required amount of product in a clean plastic container. Mix carefully until the product is completely dissolved.

2) Pour the solution obtained into the inflatable spa or swimming pool while the system

pumping is in operation, preferably near the water outlets to facilitate distribution.

3) After at least 4 hours, check pH levels. If necessary, repeat the treatment until the desired level is reached.

4) Once the process is complete, you can use the tub.

STORAGE The product should be stored in the original container, away from sources of heat and humidity.

PRODUCT CODE: BIPOPHPLUS98.