Multi-action chlorine tablets of 200 g - 5 kg

Multi-action chlorine tablets of 200 g - 5 kg

CHLORINE SANITIZING, STABILIZING, ANTI-ALGAE, FLOCCULANT

FEATURES

• Appearance: Solid tablets
• Trichloroisocyanuric acid: 95+/-3%
• Aluminum Sulphate 2.5+/-1.5%
• Copper Sulphate 1.0+/-0.5%
• Boric Acid 0.29% max.
• pH (1% in sol.) 3+/-0.3
• Humidity 0.5% max.

CAUTION: Never combine with other chemical products, including household detergents, to avoid the occurrence of adverse reactions.

INSTRUCTIONS FOR USE

1) Maintain the pH level between 7.2-7.6. If the pH is not within this range, it must be corrected.

2) The tablets can be inserted into the floating dispensers or into special dispensers.

3) The tablets dissolve slowly, approximately 3-5 days, depending on the amount of water that comes into contact with the tablets. Since they are slow-release, a chlorine shock dose may be necessary before treatment.

4) The chlorine concentration must be between 1-3 mg/l for swimming pools and 3-5 mg/l for inflatable spas and can be tested with a special kit or test strips.

STORAGE The product should be stored in the original container, away from heat sources.

PADS DIMENSIONS Diameter 76 mm – Height 24+/-1 mm

TABLE CHARACTERISTICS The product is in white tablets with blue dots, with the smell of chlorine.

PRODUCT CODE: BIPOMUL200B98.