Chlorine 56% granular dihydrate

Granular chlorine is suitable for the daily maintenance and sanitization of the swimming pool, used for shock chlorination and continuous chlorination. Quick dissolving product that has minimal impact on pH.

INSTRUCTIONS FOR USE

1) Maintain the pH level between 7.2-7.5. If the pH is not within this range, it must be corrected.

2) Maintain free chlorine residues at these levels:

POOLS: 1-3 mg/l

INFLATABLE SPAS: 3-5 mg/l. As soon as they are filled or left empty for prolonged periods, an initial dose of free chlorine of 20 mg/l is required, leaving it to act for at least 2 and a half hours.

3) Can be applied directly to inflatable pools and spas where temperatures exceed 20°C. If the temperature is below 20°C, or if in doubt, dissolve the product in a clean plastic container to a maximum quantity of 100 g per 10 liters of water. Mix until the product is completely dissolved. Pour the solution obtained into the inflatable spa and/or swimming pool while the pumping system is running, preferably near the water outlets to facilitate distribution.

4) If necessary, repeat the treatment until the level indicated in point 2 is reached.

5) It is recommended to use a double dose periodically (e.g. every week/every two weeks) to eliminate any contamination.

PRODUCT CODE: BIPODICLO5698.